What are Lemo Connectors?

Lemo is the name of a fiber-optic connector company located in Switzerland. It is derived from the company’s founder Leon Mouttet, who was an engineer and conducted significant research on the link between rare metals and noble gases. Lemo connectors are the product of this company and are push-pull style connectors that are used in a variety of applications, including telecommunications, medical, military and audio-visual.

Repairing Broken Cables

If you want to be involved in repairing broken cables with Lemo connectors, you need to use the circular push-pull connectors that are used in triax cable systems. Telecommunication companies have been using Lemo connectors for many years because they require very few tools to fix.

If you have a broken triax cable, you can repair it quickly with a Lemo connector as well by following a few simple steps:

• Cut off one end of the damaged cable using a utility knife.
• Approximately 15 inches from then end that you cut, cut the insulation with the utility knife and peel the outer insulation back and remove it.
• On the end that you cut, push the mesh back until you reach where the outer insulation still remains on the cable. Inside the foil insulation, there will be two twisted wires on top of four more pairs of twisted wires. Take the two wires that are on top and untwist them. Strip approximately ½ inch of insulation off of the ends of each wire using wire strippers.
• Attach the ends of these wires to the slots in a Lemo connector.
• Repeat steps one through four to expose the wires of the cable you are going to connect to.
• Take the four other pairs of wires in the cable and untwist them. Using the wire strippers, strip about a ½ inch of insulation off the ends of each wire.
• Attach the four pairs of wires in the cable to the Lemo connector.
• Replace the foil back of the cables and replace the wire mesh so that it covers both the connector and the wires.
• Wrap electrical tape over the repair.

Tools

Although there are many uses for Lemo connectors, repairing broken cables with Lemo connectors is one of the most widely used applications. As you can see from the above steps, it is not a very complicated process. However, you will need specific tools to help you complete the task. Be sure you have assembled all tools prior to undertaking the job of repairing your cable so you can finish quickly and without needing to run back and forth to your garage.

• Utility knife
• Wire strippers
• Electrical tape
• Needle nose pliers

Repairing broken cables with Lemo connectors can sometimes be a more complicated process than the steps outlined above. For instance if you need to repair a broken coax cable, you will need to also have:

• Insulated gloves
• Phillips head screwdriver
• Soldering iron
• Mini C-clamp
• Crimper

The steps for repairing a broken coax cable are similar to the process for other kinds of cables; however, you will need to solder the Lemo connector in place. While you can do it on your own, repairing broken cables with Lemo connectors may be best left to the professionals for safety reasons.

Lemo connectors are the latest innovation in the electronics industry and are designed to connect electric wires without having to turn and twist screws or bend wires in a certain way and hope that the contact works. Lemo connectors work by simply connecting a wide variety insert plug-ins for electronic devices, such as monitors, hard-drives, etc. Lemo connectors are also considered worldwide to be some of the highest quality in such type products.

Lemo connectors are used in electronics in a wide variety of different industries, including the medical industry. If you have been in a hospital or even in a doctor’s office lately, you will have noticed how sophisticated medical technology has become. Your average GP office even has sophisticated technology, such as a diastatic meter that is connected to a computer which can give you accurate readings of your pulse, blood pressure, and other cardiac information. Ultra sound is also frequently used in many doctor’s offices globally. In the hospital, surgeons use electronic technology with fiber optic cameras which have streamlined some of the most complex surgical procedures. X-ray machines have become digital and many of the monitors that monitor your vital signs both in the operating room and in the hospital room use electronic technology.

There are many medical electronic gadgets that Lemo connectors are being used today and many news sources have even stated that the future looks bright for Lemo, and its products are growing in popularity with many medical institutions.

One of the most ideal uses for Lemo connectors in the medical field is that many electronic devices have a wide variety of wires and plug-ins which can be both high and low voltage wiring and using Lemo connectors can be used to sort out and organize the different wiring thus preventing a potentially lethal error.

Many chiropractic physical therapy offices have an electrostatic device which is used to relax stressed and spastic muscles which can be caused through sprains or trauma. Many electrostatic machines use Lemo connectors to connect the low amperage electrodes that are glued to your skin in key muscular stress points to treat your injuries. The Lemo connectors allow the chiropractor or physical therapist to easily connect and switch electrodes from patient to patient or from one area to another.

Likewise, the EKG and diastatic machines in many doctor’s offices also use electrodes to measure heart rates, blood pressure, and pulse. Likewise, most neurologists use a device called an EEG machine to measure brain activity which uses electrodes on your head to get that data. Likewise, many physicians found that the use of Lemo connectors in connecting electrodes used in EKG, diastatic, and EEG machines to the wires that are attached to the actual machine.

The point is that Lemo connectors come in all different shapes and sizes which can be used in a wide variety of medical devices used in most modern hospitals, clinics, and doctor’s offices find these connectors to be very effective for their diagnostic equipment and other necessary medical devices used to aid in the treatment of a wide variety of different ailments. Though Lemo connectors are small, they are becoming an integral part of the medical field when it comes to their devices.

Lemo Push/Pull Connectors have provided industry solutions in connectivity and inter-device communication for over 60 years. Going forward, Lemo Push/Pull Connectors continue to design, create and supply an array of professions with the connectors. They need to keep their technology, equipment and applications running at peak efficiency.

Precision use requires precision connections. For over six decades Lemo Push/Pull Connectors have set the industry standard in over 80 countries. Lemo continues to add to its impressive catalogue of more than 50,000 combinations of connector designs. That catalogue continues to grow as clients continue to demand custom specifications for their connectors. Lemo and its partner companies serve more than 100,000 customers around the world.

Lemo’s products are viewed as the benchmark of quality in the circular connector industry. To meet many and varied uses, Lemo provides a remarkable variety of shell styles and configurations. This approach allows Lemo to bring over 50,000 combinations of connectors to industries across the globe.

Lemo connectors, plugs and receptacles link devices, computers and systems together to meet many needs.

Automotive

Audio-Video

Aerospace

Medical

Public Sector

These industries, and many more, rely on the quality, durability and professional functionality of Lemo connectors.

Automotive industries trust Lemo connectors for their sealed protection, rugged build for protection at high impact and reliability in inclement weather and hazardous environments.

Lemo connectors are used in a variety of audio-video applications. Remote camera systems, indoor and outdoor motion picture cameras use Lemo connectors that are watertight, and color coded to prevent mismatches. Analog audio/video, digital audio and HDTV equipment uses Lemo connectors as industry standards in Europe, Japan and the USA.

In the Aerospace industry Airplanes and helicopters use Lemo connectors because they can be light weight are always durable.

Major hospitals rely on equipment which uses Lemo connectors to run. From processing equipment and analyzers to electrosurgical robotics and even pacemakers and hearing aids, the medical field trusts Lemo connectors to provide reliable service.